Players build and run their own factories in the popular strategy game Factorio. One of the main elements of the game is moving fluids, which is where the fluid wagon comes in.
In this article, we'll cover all you need to know about using the fluid wagon in Factorio, including how to load and unload fluids and set the wagon's pumps in the proper positions.
Don’t forget to set up your Factorio server. Anyway, continue reading when you’ve already done that!
What Is a Fluid Wagon in Factorio?
A fluid wagon, sometimes called a rail tanker in Factorio, is a particular class of rail vehicle. The wagon is equipped with multiple tanks that are designed to hold various substances, including fuel, oil, and water. By connecting the fluid wagon to a train, fluids can be moved from one location to another.
The Process of Loading and Unloading Fluids from a Fluid Wagon
In Factorio, pumps are needed to load and unload fluids from fluid wagons. Up to three pumps, one for each tank section, can be connected simultaneously to each fluid wagon. To establish a loading station, stop the fluid wagon at the station and place a tank two tiles away from it. After that, transfer the fluid from the tank to the wagon using a single pump.When you select a recipe that requires liquid, the assembly machine will display a fluid output or inlet. You can make use of this information to set up the pumps in the appropriate positions so that you can load and unload fluids from the fluid wagon.
Splitting Fluids Between Tanks
You can split up different fluids into different tanks on a single fluid wagon in Factorio. This makes it possible to move multiple types of fluid efficiently with just one cart. But, as was already mentioned, it is crucial to understand the pumps' flow rate limitation. Place tanks near to each pump to accelerate the fill rate.Pump Alignment for the Fluid Wagon
For the pumps to attach, it is crucial to make sure the fluid cart is precisely positioned. The arrows on the pumps should point in the direction of loading and away from unloading. Aim to position them directly next to the rail. Make a train out of fluid wagons, stop it at the station, then set pumps at the wagons to determine which ones link and which ones do notHow many tanks can a fluid wagon hold in Factorio?
A fluid wagon in Factorio can hold up to six tanks, each of which can hold a distinct type of fluid. The maximum fluid capacity of each of the wagon's tank sections is 25,000 units. This suggests that, when fully loaded, a fluid wagon may hold up to 150,000 units of fluid.
Can I connect more than three pumps to a fluid wagon in Factorio?
No, with Factorio you cannot connect more than three pumps to a fluid wagon. There can be a maximum of three pumps per fluid wagon, one for each tank segment.
How can I unload fluids from a fluid wagon in Factorio?
In Factorio, pumps are required to remove fluids from a fluid wagon. Position the pumps along the rail track with the arrow facing away from the wagon. By attaching to the tank components of the fluid wagon, the pumps will initiate the fluid's automated discharge
Can I use a fluid wagon to move different kinds of fluids in Factorio?
A fluid wagon in Factorio can be used to transfer multiple types of fluid. You can efficiently transport a variety of fluids with a single fluid wagon by dividing the fluids across its tanks. As was previously mentioned, the amount of fluid that can pass through the pumps at once is restricted by the pipe that carries the fluid to the pumps.
Last Words
Transporting fluids throughout your factory can be done quite well with a fluid wagon. By following the instructions in this manual, you may load and unload fluids from the wagon fast, divide different fluids among tanks, and line the wagon with pumps.You can keep the fluid transportation system in your plant operating at peak efficiency by following these recommendations.
← Factorio How To Use Lubricant
Factorio How To Use Power Armor →
